Wood finish Fireplace Mantel

Full Demonstration




Tape It

Tape off all areas you need to paint around
Make sure your lines are clean and straight.


Prime It

with
  • Brush, roll or spray on 2 coats of
  • Make final strokes long in the direction you want the grain


Grain It Optional

With
If you want a smooth finish you can skip this step. Your brush strokes will make a subtle grain.
  • Brush on a thin coat of Wood'n Stain™ in plank size sections
  • Pull the graining tool through each section while coat is still wet




Stain It

Brush on
No need to wipe it off like other stains. It's that easy!
  • Brush on 0 to 3 coats of as desired
  • Make final strokes long in the direction you want the grain
  • Reminder: Do not wipe back the stain like other stains


Each coat of will give you a deeper finish.



Love It!

Enjoy Your New Wood Finish

Topcoat Required
  • Countertops
  • Tabletops
  • Flooring
  • Porches
  • Decking
Topcoat Optional
  • Fireplaces
  • Cabinets
  • Buffets
  • Dressers
  • Molding

If you ordered a kit that does not include the topcoat then you must make sure the topcoat you use is appropriate for the project, e.g., interior, exterior, high traffic, etc.

  • Apply thin layers of your topcoat until you finish the entire container
  • Allow two hours between coats if you are using a Retique It waterbased topcoat
  • Follow directions for dry time on any other brand of topcoat
  • Retique It will only support the use of our brand of topcoats

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.